Most common
problems & fixes

Is your AEG 911 239 008 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

Dishwasher does not start

The door of the dishwasher is not closed properly

Ensure the door is securely closed

Dishes are still dirty after washing

The wrong wash programme was selected or the dishes were arranged in such a manner that water has not reached all parts

Select the correct wash programme and ensure the dish racks are not overloaded

No water is running into the dishwasher

Tap is blocked or furred with lime-scale

Clean the tap or remove lime-scale

Dishwasher interior lighting does not work

Mains plug is not plugged in or light bulb for the interior lighting is defective

Insert mains plug or contact customer service for light bulb replacement

View all problems & fixes

Quick setup

Follow these easy steps to get your AEG 911 239 008 Dishwasher up and running in no time.

1

Unpacking and Checking

Remove all packaging materials and check the dishwasher for any transport damage. Contact your supplier if the appliance is damaged and do not connect a damaged appliance.

2

Positioning the Dishwasher

The dishwasher must be installed on a firm and level floor. For built-in, integrated, and fully integrated dishwashers, adjust the rear feet from the front of the appliance using a screwdriver.

3

Installing the Dishwasher

If the dishwasher is set up next to a cooker, install a heat-insulating, non-flammable plate between the dishwasher and the cooker, flush to the top edge of the work surface. Ensure the appliance is stable and level by extending the threaded feet using a screwdriver.

View the rest of the steps

Eco-Friendly Vibes

The AEG 911 239 008 dishwasher is printed on paper manufactured with environmentally sound processes. It's a little step towards a greener planet!

Noise Level Ninja

This dishwasher is like a stealthy ninja! Its noise level changes during the wash program, adapting to keep things quietly efficient.

Troubleshooting

The AEG 911 239 008 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

Fault Code (2)

The WATER, DOOR or SPRAY ARM indicator illuminates, indicating a potential fault that you can rectify yourself. Press the button for the wash programme that has been started to reset the indication.

Clean Tap

The filter in the threaded hose fitting at the water inlet valve is blocked. Clean the filter in the threaded hose fitting to ensure proper water flow.

Hose Installation Error

The water inlet hose is not correctly laid. Check and correct the hose installation to prevent water flow issues.

More Troubleshooting

Safety Instructions

The AEG 911 239 008 Dishwasher complies with accepted technical standards and the German Appliance Safety Law. Always transport the dishwasher upright and ensure proper installation to prevent accidents.

Economical and Ecological Dishwashing

Connect the dishwasher to the hot water supply only if your hot water is not electrically heated. Adjust the water softener correctly to ensure optimal performance.

Wash Programmes and Consumption

The dishwasher includes various programmes such as AUTO 65°C, AUTO BIO 50°C, and INTENSIVE 70°C. Energy consumption ranges from 1.05 to 1.8 kWh, and water usage ranges from 11.5 to 19 litres, depending on the selected programme.

Technical Specifications

The dishwasher has a capacity of 12 place settings and operates under water pressure between 1-10 bar. Dimensions are 850 x 600 x 600 mm (H x W x D) with a weight of 54 kg.

Troubleshooting

Refer to the troubleshooting guide for minor dishwasher faults. If professional service is required, note that service calls are not free of charge during the warranty period if the issue is not covered.

Installation and Placement

The dishwasher can be set up as a free-standing appliance without additional installation. If placed next to a cooker, a heat-insulating, non-flammable plate must be mounted between them.

PULSE WASH System

The PULSE WASH system varies motor speed and spray pressure during the wash cycle to enhance cleaning efficiency.

ENERGY SAVING Programme

This programme is designed for normally soiled dishes and consumes minimal electricity. For faster washing, the NORMAL BIO 50° programme can be used as an alternative.

Control Panel and Features

The control panel includes an ON/OFF switch and programme buttons with LED indicators. A signal tone indicates the end of a wash cycle, which can be turned on or off.

Loading Instructions

Load dishes and cutlery to ensure spray arms can rotate freely. Use only dishwasher detergent and avoid washing sponges or cloths.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Installation Guidance

The dishwasher should be set up as a stand-alone unit or with proper installation if built-in. If placed next to a cooker, ensure a heat-insulating, non-flammable plate is mounted between the dishwasher and the cooker, flush to the top edge of the work surface.

Safety and Precautionary Measures

Never transport the dishwasher without a filter. Do not operate the dishwasher if the mains cable, water inlet, or drain hose is damaged. Use only AEG authorized service engineers for repairs. Always unplug by pulling the plug, not the cable.

Preventive Maintenance

Ensure the water softener is correctly adjusted and the special salt container is filled to prevent scale deposits on dishes. Regularly clean the filter in the base of the washing compartment and ensure it's correctly positioned.

Leak Prevention

The dishwasher is equipped with an AQUA CONTROL SYSTEM to prevent water leaks. In the event of a fault, this system will immediately interrupt the water supply and activate the drain pump.

Efficient Use

Only connect the dishwasher to the hot water supply if the hot water is not electrically heated. Always shut off the water supply when the dishwasher is not in use for extended periods.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

General Specifications

  • Model Number: AEG 911 239 008
  • Type: Free-Standing Dishwasher
  • Capacity: 12 place settings
  • Dimensions: 850 x 600 x 600 mm (H x W x D)
  • Weight: 54 kg

Performance

  • Noise Level: Varies during wash programme
  • Energy Consumption: 1.05 - 1.8 kWh depending on programme
  • Water Consumption: 11.5 - 19 litres depending on programme

Programmes

  • Auto 65 °C: 95 - 115 minutes, 1.15 - 1.45 kWh, 11.5 - 19 litres
  • Auto Bio 50 °C: 95 - 115 minutes, 1.1 - 1.35 kWh, 11.5 - 19 litres
  • Intensive 70 °C: 105 - 115 minutes, 1.6 - 1.8 kWh, 17 - 19 litres
  • Normal 65 °C: 89 - 99 minutes, 1.05 - 1.25 kWh, 13 - 15 litres
  • Energy Saving 50 °C: 130 - 150 minutes, 0.95 - 1.05 kWh, 12 - 14 litres
  • Quick 40 °C: 35 minutes, 0.7 kWh, 11 litres

Technical Details

  • Permitted Water Pressure: 1-10 bar (0.1-1.0 MPa)
  • Electrical Connection: Information on rating plate inside door

Features

  • Pulse Wash System: Varying motor speed and spray pressure
  • Aqua Control System: Leak prevention system

AEG 911 239 008 Dishwasher Description

The AEG 911 239 008 is a versatile and efficient built-in dishwasher designed to accommodate the needs of modern households. With dimensions of 820-880 mm in height, 596 mm in width, and 570 mm in depth, this appliance is crafted to seamlessly integrate into your kitchen setup. It boasts a maximum capacity of 12 place settings, making it ideal for both small and large families. This model offers various wash programs, including an energy-saving 50°C wash and an intensive 70°C cycle, ensuring optimal cleaning performance for different types of dishware and utensils. The dishwasher operates with a noise level that varies during the wash cycle, ensuring a quiet and efficient operation. Its environmentally conscious design is reflected in its low water consumption, using between 11.5 to 19 liters per cycle, and energy-efficient operation, consuming between 1.05 to 1.8 kWh depending on the chosen program. This AEG dishwasher is not only a practical choice but also an eco-friendly one, aligning with sustainable practices.